AC Cars Trivia Questions

Which year did AC Cars introduce the legendary AC Cobra, a powerful roadster that is often blamed for the introduction of the 70 mph speed limit on British motorways?

1958
1961
1962
1963

Correct Answer: 1962

Correct Answer Explanation: The AC Cobra was first introduced in 1962, and its powerful performance, which was capable of exceeding 196 mph in a test run, contributed significantly to the decision to impose the 70 mph speed limit on British motorways.

In which country did the new manufacturing plant for AC Cars open in 2004, leading to the production of the carbon-fibre-bodied AC MkV?

Germany
England
South Africa
Malta

Correct Answer: Malta

Correct Answer Explanation: In 2004, AC Cars opened a new manufacturing plant in Malta to begin production of the carbon-fibre-bodied AC MkV. However, due to challenges with the factory building, production ceased in 2007.

The AC Ace was a lightweight sports car, designed by John Tojeiro and built with an aluminium body. What year did the production of the AC Ace begin?

1947
1953
1957
1960

Correct Answer: 1953

Correct Answer Explanation: The AC Ace, a lightweight sports car, was introduced in 1953, built on a chassis designed by John Tojeiro and featuring a hand-built aluminium body created by Eric George Gray.

Which Italian coachbuilder was commissioned to design an appealing GT body that could be fitted on a stretched MKIII Cobra chassis for AC Cars in the 1960s?

Zagato
Pininfarina
Bertone
Pietro Frua

Correct Answer: Pietro Frua

Correct Answer Explanation: Pietro Frua, a renowned Italian coachbuilder, was contracted to design the appealing GT body for the stretched MKIII Cobra chassis, resulting in the AC Frua model.

What year did AC Cars produce four trains, each consisting of three power cars and four coaches, for the Southend Pier Railway in Essex, a significant venture into rail transportation?

1947
1949
1953
1958

Correct Answer: 1949

Correct Answer Explanation: AC Cars ventured into rail transportation in 1949 when they built four trains for the Southend Pier Railway, each consisting of three power cars and four coaches. These trains remained in service until 1976.

Who was the influential American racing driver and automotive entrepreneur who partnered with AC Cars to create the iconic AC Cobra?

Dan Gurney
Carroll Shelby
Phil Hill
A.J. Foyt

Correct Answer: Carroll Shelby

Correct Answer Explanation: Carroll Shelby, an American racing driver and automotive entrepreneur, collaborated with AC Cars to create the legendary AC Cobra, which became a significant force in US sports car racing.

AC Cars, originally established as Auto Carriers Ltd., was known for its innovative three-wheeled vehicles. What was the name of the initial three-wheeled goods carrier launched by the company?

Mighty Atom
Auto-Carrier
AC Sociable
AC Ten

Correct Answer: Auto-Carrier

Correct Answer Explanation: In 1904, Auto Carriers Ltd. (AC Cars) introduced the Auto-Carrier, a three-wheeled goods carrier with a single rear wheel. It was a commercial success and led to the development of a passenger version called the AC Sociable.

The AC Aceca was a coupe version of the AC Ace. What year was the AC Aceca introduced?

1953
1954
1957
1959

Correct Answer: 1954

Correct Answer Explanation: The AC Aceca, a coupe version of the AC Ace, was introduced in 1954. It was slightly heavier than the convertible Ace but, due to improved aerodynamics, was slightly faster.

AC Cars built a number of invalid carriages for the UK government. What was the name of the fibreglass-bodied, single-seat invalid carriage, featuring a Villiers 2-stroke engine, that AC Cars produced starting in 1950?

Petite
Invacar
Acedes
Greyhound

Correct Answer: Invacar

Correct Answer Explanation: AC Cars built a significant number of invalid carriages for the UK government, contributing to their financial stability. One notable model was the Thundersley Invacar Type 57, a fibreglass-bodied, single-seat invalid carriage with a Villiers 2-stroke engine, produced from 1950 to 1976.

The AC Greyhound was a larger four-seater car, built on a stretched AC Ace chassis. What engine powered the AC Greyhound?

AC 2-Litre engine
Ford Windsor V8 engine
Bristol six-cylinder engine
Ford Essex V6 engine

Correct Answer: Bristol six-cylinder engine

Correct Answer Explanation: The AC Greyhound, a larger four-seater car, was built on a stretched AC Ace chassis with coil suspension all around and featured a Bristol six-cylinder engine.

In the 1970s, AC Cars sought to introduce a new, smaller car. What was the name of the mid-engined prototype built by Peter Bohanna and Robin Stables, featuring an Austin Maxi engine and transaxle?

AC 3000ME
AC Diablo
AC Aigle
AC Frua

Correct Answer: AC Diablo

Correct Answer Explanation: In the 1970s, as AC Cars aimed for a new, smaller car, Peter Bohanna and Robin Stables privately built a mid-engined prototype called the Diablo, featuring an Austin Maxi engine and transaxle. AC Cars acquired the rights to this prototype and introduced their version, the AC ME3000, in 1973.

AC Cars produced a very rare model of the AC Ace, powered by a Ford Zephyr engine. What was the approximate number of AC Ace 2.6 cars that were built?

Correct Answer: 36

Correct Answer Explanation: The AC Ace 2.6, a rare model of the AC Ace powered by a Ford Zephyr engine, had an estimated production run of only 36 cars.

The AC 3000ME, a mid-engined sports car, was launched in 1979. What was the name of the engine used in this model?

Ford Windsor V8 engine
Ford Essex V6 engine
Bristol six-cylinder engine
AC 2-Litre engine

Correct Answer: Ford Essex V6 engine

Correct Answer Explanation: The AC 3000ME, a mid-engined sports car, was powered by the Ford Essex V6 engine, placed transversely over a bespoke AC-designed gearbox.

Which of these models was not produced by AC Cars?

AC Frua
AC Cobra
AC Aceca
AC Mustang

Correct Answer: AC Mustang

Correct Answer Explanation: AC Cars produced a variety of models, including the AC Frua, AC Cobra, and AC Aceca. However, the AC Mustang was not a model produced by AC Cars. The Mustang is a model associated with Ford.

What was the approximate number of AC MKIV Cobra cars that were produced by Brian Angliss’s Autokraft company?

100
200
480
1000

Correct Answer: 480

Correct Answer Explanation: Brian Angliss, who acquired the rights to use the AC name, produced the MKIV Cobra, a model featuring US-spec bumpers and a US-regulations compliant motor. Approximately 480 of these cars were built in his factory at Brooklands.

In 1993, Brian Angliss introduced a new model of the AC Ace. What material was the chassis of this model made from?

Aluminum
Steel
Fiberglass
Stainless Steel

Correct Answer: Stainless Steel

Correct Answer Explanation: The new AC Ace, introduced in 1993 by Brian Angliss, featured a modern design with a stainless steel chassis and an aluminum body.

After Brian Angliss’s company went into receivership in 1996, it was sold to a South African businessman. What was the name of the businessman who acquired the company?

David McDonald
Derek Hurlock
William West
Alan Lubinsky

Correct Answer: Alan Lubinsky

Correct Answer Explanation: In December 1996, Brian Angliss’s company, AC Cars, went into receivership and was acquired by South African businessman Alan Lubinsky. Lubinsky continued production under the name AC Car Group Ltd.

What was the name of the joint venture AC Cars entered into with the USA-based company Iconic in 2010, resulting in the design of the “Iconic AC Roadster”?

Iconic AC Roadster
AC MK VI
AC 378 GT Zagato
AC MK II Classic

Correct Answer: Iconic AC Roadster

Correct Answer Explanation: In 2010, AC Cars announced a joint venture with Iconic, a USA-based company, leading to the design of the “Iconic AC Roadster.”

AC Cars debuted three models at the Geneva Motor Show in 2012. What was the name of the model that was initially shown as the Perana Z-One in 2009?

AC MK VI
AC 378 GT Zagato
AC MK II Classic
Iconic AC Roadster

Correct Answer: AC 378 GT Zagato

Correct Answer Explanation: At the Geneva Motor Show in 2012, AC Cars presented three models: the AC MK VI, AC MK II Classic, and AC 378 GT Zagato. The AC 378 GT Zagato was initially introduced as the Perana Z-One in 2009 and was built in South Africa by Hi-Tech Automotive.

What was the name of the special version of the AC Frua that was built in 1970, based on an extended body shell intended for the Monteverdi 375/L?

AC 3000ME
AC Aigle
AC 429
AC MK IV

Correct Answer: AC 429

Correct Answer Explanation: In 1970, a special version of the AC Frua coupe was built, utilizing an extended body shell originally intended for the Monteverdi 375/L. This one-off model was named the AC 429.

What is the name of the AC model that was designed for long-distance racing and featured a load-bearing lightweight tubular steel frame, a new front axle with single-wheel suspension, and an aerodynamically rounded body?

AC Aceca
AC Ace-Aigle
AC Ace LM Prototype
AC Greyhound

Correct Answer: AC Ace LM Prototype

Correct Answer Explanation: The AC Ace LM Prototype, designed by John Tojeiro in 1958, was specifically created for long-distance racing, featuring a lightweight tubular steel frame, a unique front axle suspension system, and an aerodynamic body.

Which of these is NOT a car model produced by AC Cars?

AC Greyhound
AC Invacar
AC Ace-Aigle
AC Mustang

Correct Answer: AC Mustang

Correct Answer Explanation: AC Cars have produced a range of models, including the AC Greyhound, AC Invacar, and AC Ace-Aigle. However, the AC Mustang is not associated with AC Cars. The Mustang is a model belonging to Ford.

In what year did AC Cars begin using the famed “AC” roundel logo?

1901
1904
1911
1922

Correct Answer: 1911

Correct Answer Explanation: The AC Cars company adopted the iconic “AC” roundel logo in 1911, when it became known as Auto Carriers Ltd.

Who was the individual who bought shares in AC Cars in 1921, subsequently becoming the governing director, but later clashed with John Weller and John Portwine, leading to their resignations?

Selwyn Edge
Sammy Davis
Victor Bruce
John Tojeiro

Correct Answer: Selwyn Edge

Correct Answer Explanation: In 1921, Selwyn Edge acquired shares in AC Cars and became the governing director. He had a strained relationship with John Weller and John Portwine, which resulted in their resignations.

What type of engine was used in the first version of the AC Cobra?

Ford V8 engine
Bristol six-cylinder engine
AC 2-Litre engine
Ford Essex V6 engine

Correct Answer: Ford V8 engine

Correct Answer Explanation: The initial version of the AC Cobra was powered by a Ford 221 Windsor V8 engine, which was later upgraded to a 260 V8 and subsequently a 289 V8 engine.

What was the name of the model that replaced the AC 3000ME in 1979, powered by a Ford Essex V6 engine?

AC 3000ME
AC Diablo
AC 429
AC MK IV

Correct Answer: AC 3000ME

Correct Answer Explanation: The AC 3000ME, a mid-engined sports car, was introduced in 1979 and continued the lineage of the earlier prototype known as the Diablo.

The AC Ace, known for its lightweight design and powerful performance, was built with an aluminium body. Who was responsible for designing and building the body of the AC Ace?

John Tojeiro
Eric George Gray
Pietro Frua
Zagato

Correct Answer: Eric George Gray

Correct Answer Explanation: Eric George Gray, a skilled coachbuilder, was responsible for designing and building the aluminium body of the AC Ace, complementing the lightweight chassis designed by John Tojeiro.

In 1958, AC Cars built a one-off AC Ace Bristol-based vehicle with a modified front and a fixed hardtop, inspired by the Swiss AC importer Hubert Patthey. What was the name of this model?

AC Aceca
AC Ace-Aigle
AC Ace LM Prototype
AC Greyhound

Correct Answer: AC Ace-Aigle

Correct Answer Explanation: The AC Ace-Aigle, a one-off model based on the AC Ace Bristol, was created in 1958 with a modified front and a fixed hardtop, inspired by Hubert Patthey, the Swiss AC importer.

The AC Cobra, a legendary performance car, was known for its powerful engine and distinctive roadster design. What was the primary purpose of the AC Cobra when it was first introduced?

To be a luxury grand tourer
To be a comfortable family car
To compete in US sports car racing
To be a cost-effective everyday car

Correct Answer: To compete in US sports car racing

Correct Answer Explanation: The AC Cobra was originally created to compete in US sports car racing, specifically to challenge the Chevrolet Corvette. Its powerful performance and lightweight design made it a formidable contender.

What was the name of the AC model that featured a stretched Cobra 427 chassis, a Frua-designed body, and a 428 Ford FE motor?

AC Aceca
AC 3000ME
AC 429
AC Frua

Correct Answer: AC Frua

Correct Answer Explanation: The AC Frua, a model featuring a stretched Cobra 427 chassis, a Frua-designed body, and a 428 Ford FE motor, was a grand tourer model aimed at wealthy customers.

Who designed the “double bubble” roof on the “AC Ace Bristol Zagato” which was a one-off car built by Zagato in 1958?

Elio Zagato
Eric George Gray
John Tojeiro
Pietro Frua

Correct Answer: Elio Zagato

Correct Answer Explanation: The “double bubble” roof on the “AC Ace Bristol Zagato,” a one-off car built by Zagato in 1958, was designed by Elio Zagato himself, known for his distinctive design elements.

The first version of the AC Ace featured an engine that had been used in AC’s earlier models. What was the name of the engine used in the first version of the AC Ace?

Ford Windsor V8 engine
Bristol six-cylinder engine
AC 2-Litre engine
Ford Essex V6 engine

Correct Answer: AC 2-Litre engine

Correct Answer Explanation: The first version of the AC Ace was powered by the AC 2-Litre engine, a six-cylinder engine that had been used in AC’s previous models.

What year did AC Cars cease production at Thames Ditton, with the car and the AC name being licensed to a new company registered as AC (Scotland) plc?

1976
1984
1986
1996

Correct Answer: 1984

Correct Answer Explanation: Production at AC Cars’ Thames Ditton facility stopped in 1984, and the car and the AC name were licensed to a new company, AC (Scotland) plc, which was run by David McDonald and operated out of Hillington, Glasgow.

Which of these was NOT a significant contributing factor to the decision to introduce the 70 mph speed limit on British motorways?

The powerful performance of the AC Cobra
A series of accidents under foggy conditions
The increasing popularity of private car ownership
The growing concern for road safety

Correct Answer: The increasing popularity of private car ownership

Correct Answer Explanation: While the increasing popularity of private car ownership was a trend, it was not a direct contributing factor to the decision to impose the 70 mph speed limit. The primary reasons for the speed limit were the high performance of cars like the AC Cobra and a series of accidents that occurred under foggy conditions.

Who was the owner of C.P. Autokraft, which acquired the AC brand in 1986 and began producing the MKIV Cobra?

David McDonald
Brian Angliss
Alan Lubinsky
Derek Hurlock

Correct Answer: Brian Angliss

Correct Answer Explanation: Brian Angliss, the owner of C.P. Autokraft, acquired the AC brand in 1986 and commenced production of the MKIV Cobra. He was known for his high standards of craftsmanship and his passion for the AC brand.

The AC 3000ME was a mid-engined sports car designed to compete with the Lotus Esprit. What was the main criticism of the AC 3000ME’s handling?

The car was too slow
The car was too heavy
The car was too expensive
The car was too difficult to control

Correct Answer: The car was too difficult to control

Correct Answer Explanation: While the AC 3000ME was generally well-regarded for its comfort, performance, and build quality, it received criticism from automotive writers for its handling. They found it to be overly difficult to control, particularly in comparison to the Lotus Esprit.

What was the name of the AC model that featured a carbon fibre body shell, a supercharged 212 S/C version with Lotus twin-turbo V8 power, and the AC Superblower with a supercharged Ford V8?

AC MK IV
AC Ace
AC Aceca
AC MK VI

Correct Answer: AC MK IV

Correct Answer Explanation: The AC MK IV, produced by AC Car Group Ltd., featured several variations, including the carbon fibre-bodied CRS version, the supercharged 212 S/C version with Lotus twin-turbo V8 power, and the AC Superblower with a supercharged Ford V8.

The AC Cobra, designed to compete with the Chevrolet Corvette, achieved significant success in racing. What was one of the main reasons why the AC Cobra eventually became outclassed in sports car racing?

The development of more powerful engines by competitors
The AC Cobra’s limited production capacity
The rising costs of racing
The growing popularity of other sports car brands

Correct Answer: The development of more powerful engines by competitors

Correct Answer Explanation: As the AC Cobra dominated US sports car racing, competitors like Ferrari responded by developing even more powerful engines. This shift in the technological landscape eventually led to the AC Cobra being outclassed in racing.

What year did Carroll Shelby sell the Cobra name to Ford and begin developing the Ford GT40?

1963
1965
1967
1969

Correct Answer: 1965

Correct Answer Explanation: Carroll Shelby, the designer of the AC Cobra, sold the Cobra name to Ford in 1965 and went on to play a key role in the development of the Ford GT40, a successful racing car that challenged Ferrari at Le Mans.

What was the name of the one-off AC model built in 1970, featuring a Frua-designed body, intended for the Monteverdi 375/L, but later modified with semi-hidden headlights?

AC 3000ME
AC Aigle
AC 429
AC MK IV

Correct Answer: AC 429

Correct Answer Explanation: The AC 429, a one-off model built in 1970, was originally designed as a Monteverdi 375/L by Frua but later modified with semi-hidden headlights.

What was the name of the company that acquired the tooling from Thames Ditton and produced the MKIV Cobra, featuring US-spec bumpers and a US-regulations compliant motor?

Autokraft
C.P. Autokraft
AC Cars
AC Car Group Ltd.

Correct Answer: Autokraft

Correct Answer Explanation: Autokraft, a company owned by Brian Angliss, acquired the tooling from Thames Ditton and produced the MKIV Cobra, featuring US-spec bumpers and a US-regulations compliant motor. Angliss later acquired the rights to use the AC name.

What was the name of the AC model that was built on a stretched Ace chassis and featured coil suspension all around, designed to be a larger, four-seater car?

AC Aceca
AC Ace-Aigle
AC Greyhound
AC 3000ME

Correct Answer: AC Greyhound

Correct Answer Explanation: The AC Greyhound, a larger four-seater car, was built on a stretched Ace chassis with coil suspension all around. It was designed to cater to customers who desired a more spacious vehicle.

What was the name of the prototype that was built by Peter Bohanna and Robin Stables in 1972, featuring an Austin Maxi engine and transaxle?

AC 3000ME
AC Diablo
AC Aigle
AC Frua

Correct Answer: AC Diablo

Correct Answer Explanation: The AC Diablo, a mid-engined prototype built by Peter Bohanna and Robin Stables in 1972, featured an Austin Maxi engine and transaxle. AC Cars later acquired the rights to this prototype and developed their own version, the AC ME3000, which was renamed the AC 3000ME.

What was the approximate number of AC Ace cars that were built between 1953 and 1963?

100
357
689
1284

Correct Answer: 689

Correct Answer Explanation: The AC Ace, a lightweight sports car, was produced between 1953 and 1963 with an estimated production run of 689 cars.

In 1993, Brian Angliss, owner of Autokraft, introduced a new model of the AC Ace. What year did Brian Angliss fully acquire the rights to use the AC name?

1982
1986
1993
1996

Correct Answer: 1986

Correct Answer Explanation: Brian Angliss, owner of Autokraft, acquired the rights to use the AC name in 1986. He had previously produced the MKIV Cobra as Autokraft, but with the acquisition of the AC name, he was able to use the full brand identity.

What was the name of the rare AC Ace model that featured a Ford Zephyr engine and a modified frame?

AC Ace 2.6
AC Ace-Aigle
AC Ace LM Prototype
AC Aceca

Correct Answer: AC Ace 2.6

Correct Answer Explanation: The AC Ace 2.6 was a rare model that featured a Ford Zephyr engine, necessitating modifications to the frame and other components. Its limited production run of 36 cars made it highly sought after by collectors.

The AC 3000ME, a mid-engined sports car, was designed to compete with the Lotus Esprit. What material was the body of the AC 3000ME made from?

Aluminum
Steel
Fiberglass
Carbon fiber

Correct Answer: Fiberglass

Correct Answer Explanation: The body of the AC 3000ME, a mid-engined sports car, was constructed from fiberglass. This material was chosen for its lightweight properties, contributing to the car’s overall performance.

What was the name of the one-off AC Ace Bristol-based vehicle that was designed specifically for the Le Mans 24-hour race in 1960?

AC Aceca
AC Ace-Aigle
AC Ace LM Prototype
AC Greyhound

Correct Answer: AC Ace-Aigle

Correct Answer Explanation: The AC Ace-Aigle, a one-off model based on the AC Ace Bristol, was designed specifically for the Le Mans 24-hour race in 1960. It featured aerodynamic improvements and a fixed hardtop.

What was the name of the AC model that was built on a stretched MKIII Cobra chassis, featured a Frua-designed body, and was known for its grand touring capabilities?

AC Aceca
AC 3000ME
AC 429
AC Frua

Correct Answer: AC Frua

Correct Answer Explanation: The AC Frua was a grand touring model built on a stretched MKIII Cobra chassis, featuring a Frua-designed body. It was known for its luxurious and powerful nature, making it a desirable choice for wealthy customers.

Who was the owner of the company that acquired the AC brand in 1986 and continued production of the Cobra MK IV under the AC name?

Brian Angliss
Alan Lubinsky
Derek Hurlock
David McDonald

Correct Answer: Brian Angliss

Correct Answer Explanation: Brian Angliss, the owner of Autokraft, acquired the AC brand in 1986 and continued production of the Cobra MK IV under the AC name. He was known for his high standards of craftsmanship and dedication to the AC brand.

What was the name of the company that built the AC MK VI, featuring a Corvette-sourced engine, and was later assembled in South Africa?

Autokraft
AC Cars
Gullwing
Hi-Tech Automotive

Correct Answer: Gullwing

Correct Answer Explanation: The AC MK VI, featuring a Corvette-sourced engine, was initially assembled by Gullwing in Germany, and later production was shifted to Hi-Tech Automotive in South Africa.

The AC Ace, known for its lightweight design and powerful performance, was built with an aluminium body. What was the primary reason for using aluminium in the construction of the body?

Aluminium was a readily available material at the time.
Aluminium was a less expensive material than other options.
Aluminium was known for its lightweight properties.
Aluminium was a more durable material than other options.

Correct Answer: Aluminium was known for its lightweight properties.

Correct Answer Explanation: Aluminium was chosen for the body of the AC Ace because it was known for its lightweight properties. This contributed significantly to the car’s overall performance and handling.

What was the name of the company that produced the AC MK II Classic, featuring a Ford-sourced engine and composite or alloy bodies?

Autokraft
AC Cars
Gullwing
Hi-Tech Automotive

Correct Answer: Hi-Tech Automotive

Correct Answer Explanation: The AC MK II Classic, featuring a Ford-sourced engine and composite or alloy bodies, was built by Hi-Tech Automotive in South Africa.

What was the approximate number of AC 3000ME cars that were built between 1979 and 1985?

Correct Answer: 101

Correct Answer Explanation: The AC 3000ME, a mid-engined sports car, was produced between 1979 and 1985, with an estimated production run of 101 cars.

The AC Cobra, a powerful roadster, was first introduced with a Ford Windsor V8 engine. What was the displacement of the original Ford Windsor V8 engine used in the AC Cobra?

221 cubic inches
260 cubic inches
289 cubic inches
427 cubic inches

Correct Answer: 221 cubic inches

Correct Answer Explanation: The initial version of the AC Cobra featured a 221 cubic inch Ford Windsor V8 engine. This engine was later upgraded to larger displacements, such as the 260 cubic inch and 289 cubic inch engines.

What was the name of the AC model that featured a stretched MKIII Cobra chassis, a Frua-designed body, and a 427 or 428 Ford FE motor?

AC Aceca
AC 3000ME
AC 429
AC Frua

Correct Answer: AC Frua

What was the name of the company that built the AC MK II Classic, featuring a Ford-sourced engine and composite or alloy bodies?

Autokraft
AC Cars
Gullwing
Hi-Tech Automotive

Correct Answer: Hi-Tech Automotive

Correct Answer Explanation: The AC MK II Classic, featuring a Ford-sourced engine and composite or alloy bodies, was built by Hi-Tech Automotive in South Africa.

What was the approximate number of AC 3000ME cars that were built between 1979 and 1985?

Correct Answer: 101

Correct Answer Explanation: The AC 3000ME, a mid-engined sports car, was produced between 1979 and 1985, with an estimated production run of 101 cars.

The AC Cobra, a powerful roadster, was first introduced with a Ford Windsor V8 engine. What was the displacement of the original Ford Windsor V8 engine used in the AC Cobra?

221 cubic inches
260 cubic inches
289 cubic inches
427 cubic inches

Correct Answer: 221 cubic inches

What was the name of the AC model that featured a stretched MKIII Cobra chassis, a Frua-designed body, and a 427 or 428 Ford FE motor?

AC Aceca
AC 3000ME
AC 429
AC Frua

Correct Answer: AC Frua

Learn More