Can Super-Dry Solve My Humidity Problems?

Image Source

Quiz Questions

1.
What is your working pressure?
- A.
  0 - 150 psi (standard)
- B.
  Over 150 psi (high pressure)
2.
What is the CFM of your application
- A.
  0 -45 CFM
- B.
  45-70 CFM
- C.
  70-150 CFM
- D.
  150-200 CFM
- E.
  200-300 CFM
- F.
  Above 300 CFM
3.
Type of use?
- A.
  Intermittent
- B.
  Continuous (24/7)
4.
Do you need a stable -40 °F degrees dew point?
- A.
  No, we just need STANDARD dry compressed air
- B.
  Yes, we need EXTREMELY dry compressed air
5.
What best represents your application?
- A.
  Image Source
  Manufacturing
- B.
  Image Source
  Sand Blast
- C.
  Image Source
  Paint Shop
- D.
  Image Source
  Air Tool & Nail Gun
- E.
  Image Source
  Diesel Compressor
- F.
  Image Source
  Other
6.
Where are you located?
- A.
  Image Source
  Canada
- B.
  Image Source
  USA
- C.
  Image Source
  World
7.
Where do you want to install the air dryer
- A.
  At the point-of-use
- B.
  At least 20 feet from the compressor
- C.
  In the compressor room
8.
Interior or exterior installation?
- A.
  The dryer will be installed in a plant (heated)
- B.
  The dryer will be installed outside in a cold environment
9.
Where is the the air tool used most often?
- A.
  Inside an heated plant
- B.
  Outside in a cold environment
10.
What is your preferred connection?
- A.
  1/4" NPT
- B.
  1/2" NPT
11.
How big is your paint shop?
- A.
  I am only using one paint gun
- B.
  I am using 2-3 paint guns
- C.
  I have a large paint booth
12.
Do you have an air cooling system?
- A.
  Yes, I have an air cooled after-cooler
- B.
  Yes, I have a water cooled after-cooler
- C.
  Yes, I have a refrigerated unit
- D.
  No
13.
What is the diameter of your air line?
- A.
  1/4"
- B.
  1/2"
- C.
  3/4"
- D.
  1"
14.
Select the type of contaminants that you need to remove from your compressed air?
- A.
  HUMIDITY (water vapor)
- B.
  Humidity and WATER (bulk liquids)
- C.
  Humidity, water and PARTICULATES (ex: pipe scale, rust, dust)
- D.
  Humidity, water, particulates and OIL (ex: compressor oil)
- E.
  Humidity, water, particulates, oil and VAPORS (ex: odor, taste)
15.
What is the diameter of your air line?
- A.
  3/4"
- B.
  1"
- C.
  1-1/2"
16.
What best describes your situation?
- A.
  The Super-Dry will be used as a SUPPLEMENT to an actual air dryer
- B.
  The Super-Dry will be the ONLY air dryer

Quiz Outcomes

1.
Pressure Limitation
Unfortunately, given that your working pressure exceeds 150 psi, we are not able to offer you a solution. The maximum working pressure of the Super-Dry air dryers is 150 psi. Pro Tip: You may install a pressure regulator before the Super-Dry in order to reduce the pressure to 150 psi.
2.
Application Limitation
The Super-Dry air dryers are designed for intermittent applications. For a continuous (24/7) application, a refrigerated or twin-tower air dryer would be a better choice. Pro Tip: A Super-Dry air dryer can be installed downstream of a refrigerated or a twin-tower air dryer in order to supplement the main air dryer.
3.
Flow Limitation
Unfortunately, your flow requirements exceeds the capacity of our air dryers. Our systems covers up to 300 cfm. Pro Tip: It is possible to install two (2) Air Dryers in parallel in order to split the flow and go up to 600 cfm. For these specific situations we suggest that we discuss your application further in order to properly size the right models. You can contact Marc Rayle, marc@super-dry.com or 1-888-828-1122 ext. 222
4.
Temperature Limitation
The Super-Dry air dryer can't be installed in the compressor room when there is no after-cooler available. When the temperature of the compressed air exceeds 100⁰ F the performance of the desiccant decreases and optimal performance can't be obtained.Pro Tip: If you can't install the Super-Dry at the point-of-use, you can install it at least 20 feet from the compressor or use a "zig zag" piping layout, see below:
5.
Dew Point Limitation
Unfortunately, Super-Dry Air Dryers (or any other brands of single tower desiccant air dryers) can't deliver a stable -40⁰ F dew point. The best way to obtain a stable -40⁰ F dew point is to use a twin tower regenerative air dryer. We don't make these dryers. Pro Tip: In many cases, a -40⁰ F dew point is over treatment. You should always aim at a dew point that fits your needs.
6.
D1-PK-03
Image Source
Based on your answers, we recommend an Air Dryer (D-1) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
7.
D1-PK-W45-03
Image Source
Based on your answers, we recommend a two-stage system: a Water Separator (FSD-45-W) that will remove bulk liquids followed by an Air Dryer (D-1) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
8.
D1-PK-WX45-03
Image Source
Based on your answers, we recommend a three-stage system: a Water Separator (FSD-45-W) that will remove bulk liquids, followed an Air Filter (SAF-45) that will remove particulates down to 1.0 micron and by an Air Dryer (D-1) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
9.
D1-PK-WXY45-03
Image Source
Based on your answers, we recommend a four-stage system: Water Separator (FSD-45-W) that will remove bulk liquids followed by two Air Filters (SAF-45) that will remove particulates down to 1.0 micron (Grade X Element), oil carry over down to 0.01 ppm (Grade Y Element) and an Air Dryer (D-1) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
10.
D1-PK-WXYZ45-03
Image Source
Based on your answers, we recommend a five-stage system: Water Separator (FSD-45-W) that will remove bulk liquids followed by three Air Filters (SAF-45) that will remove particulates down to 1.0 micron (Grade X Element), oil carry over down to 0.01 ppm (Grade Y Element) and oil vapors (Grade Z Element) and an Air Dryer (D-1) that will remove moisture and humidity.
11.
D1-PK-W85-03
Image Source
Based on your answers, we recommend a two-stage system: a Water Separator (FSD-85-W) that will remove bulk liquids followed by an Air Dryer (D-1) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
12.
D1-PK-WX85-03
Image Source
Based on your answers, we recommend a three-stage system: a Water Separator (FSD-85-W) that will remove bulk liquids, followed an Air Filter (SAF-85) that will remove particulates down to 1.0 micron and by an Air Dryer (D-1) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
13.
D1-PK-WXY85-03
Image Source
Based on your answers, we recommend a four-stage system: Water Separator (FSD-85-W) that will remove bulk liquids followed by two Air Filters (SAF-85) that will remove particulates down to 1.0 micron (Grade X Element), oil carry over down to 0.01 ppm (Grade Y Element) and an Air Dryer (D-1) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
14.
D1-PK-WXYZ85-03
Image Source
Based on your answers, we recommend a five-stage system: Water Separator (FSD-85-W) that will remove bulk liquids followed by three Air Filters (SAF-85) that will remove particulates down to 1.0 micron (Grade X Element), oil carry over down to 0.01 ppm (Grade Y Element) and oil vapors (Grade Z Element) and an Air Dryer (D-1) that will remove moisture and humidity.
15.
D1-PK-W185-03
Image Source
Based on your answers, we recommend a two-stage system: a Water Separator (FSD-185-W) that will remove bulk liquids followed by an Air Dryer (D-1) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
16.
D1-PK-WX185-03
Image Source
Based on your answers, we recommend a three-stage system: a Water Separator (FSD-185-W) that will remove bulk liquids, followed an Air Filter (SAF-185) that will remove particulates down to 1.0 micron and by an Air Dryer (D-1) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
17.
D1-PK-WXY185-03
Image Source
Based on your answers, we recommend a four-stage system: Water Separator (FSD-185-W) that will remove bulk liquids followed by two Air Filters (SAF-185) that will remove particulates down to 1.0 micron (Grade X Element), oil carry over down to 0.01 ppm (Grade Y Element) and an Air Dryer (D-1) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
18.
D1-PK-WXYZ185-03
Image Source
Based on your answers, we recommend a five-stage system: Water Separator (FSD-185-W) that will remove bulk liquids followed by three Air Filters (SAF-185) that will remove particulates down to 1.0 micron (Grade X Element), oil carry over down to 0.01 ppm (Grade Y Element) and oil vapors (Grade Z Element) and an Air Dryer (D-1) that will remove moisture and humidity.
19.
D2-PK-03
Image Source
Based on your answers, we recommend an Air Dryer (D-2) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
20.
D2-PK-W185-03
Image Source
Based on your answers, we recommend a two-stage system: a Water Separator (FSD-185-W) that will remove bulk liquids followed by an Air Dryer (D-2) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
21.
D2-PK-WX185-03
Image Source
Based on your answers, we recommend a three-stage system: a Water Separator (FSD-185-W) that will remove bulk liquids, followed an Air Filter (SAF-185) that will remove particulates down to 1.0 micron and by an Air Dryer (D-2) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
22.
D2-PK-WXY185-03
Image Source
Based on your answers, we recommend a four-stage system: Water Separator (FSD-185-W) that will remove bulk liquids followed by two Air Filters (SAF-185) that will remove particulates down to 1.0 micron (Grade X Element), oil carry over down to 0.01 ppm (Grade Y Element) and an Air Dryer (D-2) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
23.
D2-PK-WXYZ185-03
Image Source
Based on your answers, we recommend a five-stage system: Water Separator (FSD-185-W) that will remove bulk liquids followed by three Air Filters (SAF-185) that will remove particulates down to 1.0 micron (Grade X Element), oil carry over down to 0.01 ppm (Grade Y Element) and oil vapors (Grade Z Element) and an Air Dryer (D-2) that will remove moisture and humidity.
24.
D2-PK-W375-03
Image Source
Based on your answers, we recommend a two-stage system: a Water Separator (FSD-375-W) that will remove bulk liquids followed by an Air Dryer (D-2) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
25.
D2-PK-WX375-03
Image Source
Based on your answers, we recommend a three-stage system: Water Separator (FSD-375-W) that will remove bulk liquids followed by an Air Filter (SAF-375) that will remove particulates down to 1.0 micron and an Air Dryer (D-2) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
26.
D2-PK-WXY375-03
Image Source
Based on your answers, we recommend a four-stage system: Water Separator (FSD-375-W) that will remove bulk liquids followed by two Air Filters (SAF-375) that will remove particulates down to 1.0 micron (Grade X Element), oil carry over down to 0.01 ppm (Grade Y Element) and an Air Dryer (D-2) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
27.
D2-PK-WXYZ375-03
Image Source
Based on your answers, we recommend a five-stage system: Water Separator (FSD-375-W) that will remove bulk liquids followed by three Air Filters (SAF-375) that will remove particulates down to 1.0 micron (Grade X Element), oil carry over down to 0.01 ppm (Grade Y Element) and oil vapors (Grade Z Element) and an Air Dryer (D-2) that will remove moisture and humidity.
28.
D3-PK-03
Image Source
Based on your answers, we recommend an Air Dryer (D-3) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
29.
D3-PK-W375-03
Image Source
Based on your answers, we recommend a two-stage system: a Water Separator (FSD-375-W) that will remove bulk liquids followed by an Air Dryer (D-3) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
30.
D3-PK-WX375-03
Image Source
Based on your answers, we recommend a three-stage system: a Water Separator (FSD-375-W) that will remove bulk liquids, followed an Air Filter (SAF-375) that will remove particulates down to 1.0 micron and by an Air Dryer (D-3) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
31.
D3-PK-WXY375-03
Image Source
Based on your answers, we recommend a four-stage system: Water Separator (FSD-375-W) that will remove bulk liquids followed by two Air Filters (SAF-375) that will remove particulates down to 1.0 micron (Grade X Element), oil carry over down to 0.01 ppm (Grade Y Element) and an Air Dryer (D-3) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
32.
D3-PK-WXYZ375-03
Image Source
Based on your answers, we recommend a five-stage system: Water Separator (FSD-375-W) that will remove bulk liquids followed by three Air Filters (SAF-375) that will remove particulates down to 1.0 micron (Grade X Element), oil carry over down to 0.01 ppm (Grade Y Element) and oil vapors (Grade Z Element) and an Air Dryer (D-3) that will remove moisture and humidity.
33.
D4-PK-03
Image Source
Based on your answers, we recommend an Air Dryer (D-4) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
34.
D4-PK-W515-03
Image Source
Based on your answers, we recommend a two-stage system: a Water Separator (FSD-515-W) that will remove bulk liquids followed by an Air Dryer (D-4) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
35.
D4-PK-WX515-03
Image Source
Based on your answers, we recommend a three-stage system: a Water Separator (FSD-515-W) that will remove bulk liquids, followed an Air Filter (SAF-515) that will remove particulates down to 1.0 micron and by an Air Dryer (D-4) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
36.
D4-PK-WXY515-03
Image Source
Based on your answers, we recommend a four-stage system: Water Separator (FSD-515-W) that will remove bulk liquids followed by two Air Filters (SAF-515) that will remove particulates down to 1.0 micron (Grade X Element), oil carry over down to 0.01 ppm (Grade Y Element) and an Air Dryer (D-4) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
37.
D4-PK-WXYZ515-03
Image Source
Based on your answers, we recommend a five-stage system: Water Separator (FSD-515-W) that will remove bulk liquids followed by three Air Filters (SAF-515) that will remove particulates down to 1.0 micron (Grade X Element), oil carry over down to 0.01 ppm (Grade Y Element) and oil vapors (Grade Z Element) and an Air Dryer (D-4) that will remove moisture and humidity.
38.
D1-PK-04
Image Source
Based on your answers, we recommend an Air Dryer (D-1) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
39.
D1-PK-W45-04
Image Source
Based on your answers, we recommend a two-stage system: a Water Separator (FSD-45-W) that will remove bulk liquids followed by an Air Dryer (D-1) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
40.
D1-PK-WX45-04
Image Source
Based on your answers, we recommend a three-stage system: a Water Separator (FSD-45-W) that will remove bulk liquids, followed an Air Filter (SAF-45) that will remove particulates down to 1.0 micron and by an Air Dryer (D-1) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
41.
D1-PK-WXY45-04
Image Source
Based on your answers, we recommend a four-stage system: Water Separator (FSD-45-W) that will remove bulk liquids followed by two Air Filters (SAF-45) that will remove particulates down to 1.0 micron (Grade X Element), oil carry over down to 0.01 ppm (Grade Y Element) and an Air Dryer (D-1) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
42.
D1-PK-WXYZ45-04
Image Source
Based on your answers, we recommend a five-stage system: Water Separator (FSD-45-W) that will remove bulk liquids followed by three Air Filters (SAF-45) that will remove particulates down to 1.0 micron (Grade X Element), oil carry over down to 0.01 ppm (Grade Y Element) and oil vapors (Grade Z Element) and an Air Dryer (D-1) that will remove moisture and humidity.
43.
D1-PK-W85-04
Image Source
Based on your answers, we recommend a two-stage system: a Water Separator (FSD-85-W) that will remove bulk liquids followed by an Air Dryer (D-1) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
44.
D1-PK-WX85-04
Image Source
Based on your answers, we recommend a three-stage system: a Water Separator (FSD-85-W) that will remove bulk liquids, followed an Air Filter (SAF-85) that will remove particulates down to 1.0 micron and by an Air Dryer (D-1) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
45.
D1-PK-WXY85-04
Image Source
Based on your answers, we recommend a four-stage system: Water Separator (FSD-85-W) that will remove bulk liquids followed by two Air Filters (SAF-85) that will remove particulates down to 1.0 micron (Grade X Element), oil carry over down to 0.01 ppm (Grade Y Element) and an Air Dryer (D-1) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
46.
D1-PK-WXYZ85-04
Image Source
Based on your answers, we recommend a five-stage system: Water Separator (FSD-85-W) that will remove bulk liquids followed by three Air Filters (SAF-85) that will remove particulates down to 1.0 micron (Grade X Element), oil carry over down to 0.01 ppm (Grade Y Element) and oil vapors (Grade Z Element) and an Air Dryer (D-1) that will remove moisture and humidity.
47.
D1-PK-W185-04
Image Source
Based on your answers, we recommend a two-stage system: a Water Separator (FSD-185-W) that will remove bulk liquids followed by an Air Dryer (D-1) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
48.
D1-PK-WX185-04
Image Source
Based on your answers, we recommend a three-stage system: a Water Separator (FSD-185-W) that will remove bulk liquids, followed an Air Filter (SAF-185) that will remove particulates down to 1.0 micron and by an Air Dryer (D-1) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
49.
D1-PK-WXY185-04
Image Source
Based on your answers, we recommend a four-stage system: Water Separator (FSD-185-W) that will remove bulk liquids followed by two Air Filters (SAF-185) that will remove particulates down to 1.0 micron (Grade X Element), oil carry over down to 0.01 ppm (Grade Y Element) and an Air Dryer (D-1) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
50.
D1-PK-WXYZ185-04
Image Source
Based on your answers, we recommend a five-stage system: Water Separator (FSD-185-W) that will remove bulk liquids followed by three Air Filters (SAF-185) that will remove particulates down to 1.0 micron (Grade X Element), oil carry over down to 0.01 ppm (Grade Y Element) and oil vapors (Grade Z Element) and an Air Dryer (D-1) that will remove moisture and humidity.
51.
D2-PK-04
Image Source
Based on your answers, we recommend an Air Dryer (D-2) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
52.
D2-PK-W185-04
Image Source
Based on your answers, we recommend a two-stage system: a Water Separator (FSD-185-W) that will remove bulk liquids followed by an Air Dryer (D-2) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
53.
D2-PK-WX185-04
Image Source
Based on your answers, we recommend a three-stage system: a Water Separator (FSD-185-W) that will remove bulk liquids, followed an Air Filter (SAF-185) that will remove particulates down to 1.0 micron and by an Air Dryer (D-2) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
54.
D2-PK-WXY185-04
Image Source
Based on your answers, we recommend a four-stage system: Water Separator (FSD-185-W) that will remove bulk liquids followed by two Air Filters (SAF-185) that will remove particulates down to 1.0 micron (Grade X Element), oil carry over down to 0.01 ppm (Grade Y Element) and an Air Dryer (D-2) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
55.
D2-PK-WXYZ185-04
Image Source
Based on your answers, we recommend a five-stage system: Water Separator (FSD-185-W) that will remove bulk liquids followed by three Air Filters (SAF-185) that will remove particulates down to 1.0 micron (Grade X Element), oil carry over down to 0.01 ppm (Grade Y Element) and oil vapors (Grade Z Element) and an Air Dryer (D-2) that will remove moisture and humidity.
56.
D2-PK-W375-04
Image Source
Based on your answers, we recommend a two-stage system: a Water Separator (FSD-375-W) that will remove bulk liquids followed by an Air Dryer (D-2) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
57.
D2-PK-WX375-04
Image Source
Based on your answers, we recommend a three-stage system: Water Separator (FSD-375-W) that will remove bulk liquids followed by an Air Filter (SAF-375) that will remove particulates down to 1.0 micron and an Air Dryer (D-2) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
58.
D2-PK-WXY375-04
Image Source
Based on your answers, we recommend a four-stage system: Water Separator (FSD-375-W) that will remove bulk liquids followed by two Air Filters (SAF-375) that will remove particulates down to 1.0 micron (Grade X Element), oil carry over down to 0.01 ppm (Grade Y Element) and an Air Dryer (D-2) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
59.
D2-PK-WXYZ375-04
Image Source
Based on your answers, we recommend a five-stage system: Water Separator (FSD-375-W) that will remove bulk liquids followed by three Air Filters (SAF-375) that will remove particulates down to 1.0 micron (Grade X Element), oil carry over down to 0.01 ppm (Grade Y Element) and oil vapors (Grade Z Element) and an Air Dryer (D-2) that will remove moisture and humidity.
60.
D3-PK-04
Image Source
Based on your answers, we recommend an Air Dryer (D-3) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
61.
D3-PK-W375-04
Image Source
Based on your answers, we recommend a two-stage system: a Water Separator (FSD-375-W) that will remove bulk liquids followed by an Air Dryer (D-3) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
62.
D3-PK-WX375-04
Image Source
Based on your answers, we recommend a three-stage system: a Water Separator (FSD-375-W) that will remove bulk liquids, followed an Air Filter (SAF-375) that will remove particulates down to 1.0 micron and by an Air Dryer (D-3) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
63.
D3-PK-WXY375-04
Image Source
Based on your answers, we recommend a four-stage system: Water Separator (FSD-375-W) that will remove bulk liquids followed by two Air Filters (SAF-375) that will remove particulates down to 1.0 micron (Grade X Element), oil carry over down to 0.01 ppm (Grade Y Element) and an Air Dryer (D-3) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
64.
D3-PK-WXYZ375-04
Image Source
Based on your answers, we recommend a five-stage system: Water Separator (FSD-375-W) that will remove bulk liquids followed by three Air Filters (SAF-375) that will remove particulates down to 1.0 micron (Grade X Element), oil carry over down to 0.01 ppm (Grade Y Element) and oil vapors (Grade Z Element) and an Air Dryer (D-3) that will remove moisture and humidity.
65.
D4-PK-04
Image Source
Based on your answers, we recommend an Air Dryer (D-4) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
66.
D4-PK-W515-04
Image Source
Based on your answers, we recommend a two-stage system: a Water Separator (FSD-515-W) that will remove bulk liquids followed by an Air Dryer (D-4) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
67.
D4-PK-WX515-04
Image Source
Based on your answers, we recommend a three-stage system: a Water Separator (FSD-515-W) that will remove bulk liquids, followed an Air Filter (SAF-515) that will remove particulates down to 1.0 micron and by an Air Dryer (D-4) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
68.
D4-PK-WXY515-04
Image Source
Based on your answers, we recommend a four-stage system: Water Separator (FSD-515-W) that will remove bulk liquids followed by two Air Filters (SAF-515) that will remove particulates down to 1.0 micron (Grade X Element), oil carry over down to 0.01 ppm (Grade Y Element) and an Air Dryer (D-4) that will remove moisture and humidity. As an option for your Air Dryer you may add an Automatic Timer Drain (TD-1/4) that will guarantee regular uninterrupted condensate drainage and a Moisture and Temperature Indicator (HGT-1/4) that will indicate the optimum moment to replace the cartridge.
69.
D4-PK-WXYZ515-04
Image Source
Based on your answers, we recommend a five-stage system: Water Separator (FSD-515-W) that will remove bulk liquids followed by three Air Filters (SAF-515) that will remove particulates down to 1.0 micron (Grade X Element), oil carry over down to 0.01 ppm (Grade Y Element) and oil vapors (Grade Z Element) and an Air Dryer (D-4) that will remove moisture and humidity.
70.
ATD-XL-03
Image Source
Pro Tip: We recommend one dryer per paint gun. Always install the unit as close as possible to the air tool. It is important that the compressed air has time to cool down.
71.
ATD-CL-03
Image Source
Pro Tip: Always install the unit as close as possible to your nail gun. It is important that the compressed air has time to cool down.
72.
ATD 1/4-03
Image Source
Pro Tip: Always install the unit as close as possible to the air tool. It is important that the compressed air has time to cool down.
73.
ATD 1/2-03
Image Source
Pro Tip: Always install the unit as close as possible to the air tool. It is important that the compressed air has time to cool down.
74.
ATD-XL-04
Image Source
Pro Tip: We recommend one dryer per paint gun. Always install the unit as close as possible to the air tool. It is important that the compressed air has time to cool down.
75.
ATD 1/4-04
Image Source
Pro Tip: We recommend one dryer per air tool. Always install the unit as close as possible to the air tool. It is important that the compressed air has time to cool down.
76.
ATD 1/2-04
Image Source
Pro Tip: We recommend one dryer per air tool. Always install the unit as close as possible to the air tool. It is important that the compressed air has time to cool down.
77.
ATD-CL-04
Image Source
Pro Tip: We recommend one dryer per nail gun. Always install the unit as close as possible to the air tool. It is important that the compressed air has time to cool down.

Can Super-Dry Solve My Humidity Problems?

The quiz will confirm if SUPER-DRY is right for your application. If there is a fit, the quiz will generate the recommended models and sizing in less than 2 minutes!

Quiz Questions

Quiz Outcomes